Roof Waterproofing service

Steps of Waterproofing the House During Construction renovation

Steps of Waterproofing the House During Construction

Do you know about that? When you build a new house, it is crucial to keep many things in
mind, including a waterproofing process that can ensure a safe and healthy home. However,
the importance of this process cannot be overstated. Water entering the structure of a house
causes many damages, which leads to various diseases, including mold and mildew. As a result,
the standard value of your house decreases significantly and it loses its original condition and
value. It is very important to carry out the waterproofing process and pay attention to it. In this
article, we will guide you on how you can ensure the Waterproofing the House During
Construction so that your house remains a safe and durable building.

1. Planning and Assessment/ Waterproofing of the House During Construction

Before the process of building, many things are considered, among which are the location
where you are building the house, the land, and all the surrounding factors such as proximity to
the river, etc. They should be kept in mind. Apart from this, you can also see what the soil
conditions are like here. Is it important for drainage or not?
In addition, It is highly recommended to consult with a waterproofing expert or architect before
commencing the waterproofing process. Site Preparation and Excavation
Before starting any new work, you should prepare the site well. Before starting any new work,
it should be ensured that the water drainage is good. The soil should be well compacted and
free from debris and can retain water. When it comes to its foundation, check carefully around
the foundation, where water can easily seep in if the ground is not properly leveled and graded.
This time, make sure the excavation is deep enough and the drainage system is perfect to keep
water away from the entire foundation.

2. Waterproofing the Foundation / Waterproofing the House During
Construction

When it comes to waterproofing to prevent water ingress, the foundation is the weakest part of
the house, so it is very important to get it waterproofed there so that your house can be
completely protected. In addition, you have to use high-quality waterproofing material, such as
the ones included in the Master seal kit. It prevents water from entering the foundation and
acts as a safe and durable shield.

1 Bituminous Membrane: Firstly, this is a flexible, durable material that is applied to
the foundation and exterior walls to create a waterproof barrier.
2 Cementitious Coating: Secondly, A mixture of cement and other waterproofing
agents are applied to the foundation, providing a protective layer.
3 Liquid Waterproofing: Applied directly to the surface, liquid-based coatings harden
into a waterproof membrane.
Make sure that all joints are sealed and no space is left for water. By installing proper sealings in
the right places, it is protected from water for a long time, which solves many of your problems.
3. Installing a Drainage System
The special new drain system prevents water from flowing into the foundation, and these are
available in various types, including:
1 French Drains:
A large amount of gravel or rock that is rich in sand and prevents water from seeping
into the foundation.
2 Sump Pump:
A large pump in the basement of your house prevents water from coming in or works to
remove water from the sump.
3 Weeping Tile:
Pumps installed in large holes near the new foundation absorb the water and transport
it to the drainage system so that all the water can be drained out.
4. Waterproofing the Roof
Just as waterproofing the foundation is one of the most important things to do, paying
attention to the roof is also a very important process. A properly waterproofed roof prevents
many problems from occurring in your home and keeps the floor above you completely safe.

1 Waterproof Roofing Membranes: Waterproofing the House During
Construction

So, you must use this material or a pre-made one in Veto for a complete and durable roof
waterproofing.
 Roof Flashing:
Have these chimney skylights, and all the edges around them should be well sealed to
prevent water from getting into the seeping

 Proper Roof Slope:
Ensure that the roof is sloped properly to allow water to run off rather than pool.
5. Sealing Windows and Doors
This is a great place for water to enter your home&windows and doors. Before building a
house, make sure that all the holes in your home& windows and doors are well sealed and that
the windows and doors are well fixed so that water cannot enter. All gaps and cracks are well
sealed and this can be ensured through high-quality caulking.
We will take full care of this; all the good girls and the door frames are well installed, and even
if the walls are not protected from water, the water will prevent water from entering through
these doors and windows.

6. Wall and Floor Treatments/ Waterproofing the House During
Construction

We have seen that waterproofing the walls and floors of your home is very important,
especially in areas where there is a lot of moisture. It is important to coat these areas well,
especially those areas where there is a lot of moisture, including bathrooms, kitchens, and
basements. Cement-based waterproofing is highly amazing for walls and floors, which will save
you from many problems and problems. First of all, you should coat your basement with a good
coating membrane and cover all areas.
7. Landscaping and Grading
A suitable type of soil and grading make a significant difference in how well your home is
waterproofed. Make sure your home's slope and foundation are not too far from the water so
that water does not collect in bad weather. It is also very important to use gravel and other
materials. If your roof is prone to heavy rain, use gutters in different locations and create a
sloping area below so that water can drain into the gutter.

8. Final Inspection and Testing/MASTER ROOF TREATMENTS EXPERTS

Once the waterproofing is complete, inspect all the windows and doors of the house thoroughly
to make sure they are properly sealed and that there are no cracks or holes in any wall.. The
drainage system should also be checked thoroughly to ensure that there are no weaknesses. To
test the pressure, water is pumped from wherever there is a leak. There may be problems
there, so you can resolve them immediately to avoid other major problems.
9. Ongoing Maintenance/ Waterproofing the House During
Construction
Waterproofing is not a one-time job. This time, it requires full attention. Regular updates. As
your home is going to last for a long time, you will especially need to thoroughly inspect all the

foundations, gutters, and other things in your home. You have all the maintenance items in
them. You can keep your home waterproof and avoid many problems in the long run.
Roof waterproofing company Master Roof Treatments service
To ensure a secure, water-resistant, and durable home, it is important to implement all the
steps and measures related to waterproofing your house during construction. Also, ensure that
the materials used Master seal kit are of the highest quality.
To get your house waterproofed, you can consult an expert Roof waterproofing company Master
Roof Treatments service
Be it waterproofing during construction or renovation, our experts will provide you with your
specific needs.

Leave a Comment

Your email address will not be published. Required fields are marked *